Seven tanks, not wipe and spray
Preparation stays under the same accountable production system as fabrication.
Paint shop
We pretreat, blast, powder coat and wet paint parts in-house across seven tank, shot blast, powder booth, wet paint booth and curing oven lines.
Request a quote
Specifications
| Machine | Specification | Quantity | Plant |
|---|---|---|---|
| Coating thickness and adhesion testing | DFT gauge and cross-hatch adhesion testing | In process | Mumbai (Vasai) and Nagpur |
| Effluent treatment plant | Under ISO 14001:2015 | 1 | Mumbai (Vasai) |
Materials and thickness
CRCAMild steelStainless steelAluminium
Parts we make
Why customers choose us
Powder and wet paint under one roof
Parts are routed to the finish that suits the specification, powder coat or liquid paint, without leaving the site.
No transport between operations
Assemblies move from welding through blasting, coating and oven cure without leaving the site.
Coating: the technical detail behind this page
Seven-tank pretreatment, phosphating, shot blasting, powder and wet paint selection, film thickness and the failure modes that show up two monsoons later.
Coating · 10 min read
Degreasing mild steel parts before coating
Why a 1 µm oil film defeats powder on mild steel, the alkaline cycle that removes it, the water-break test that proves it, and the film build to specify.
Coating · 10 min read
Degreasing before powder coating
Why degreasing decides powder adhesion: what has to come off, how a seven-tank line works, rinse conductivity, film build, cure and the failures it prevents.
Coating · 10 min read
Shot blasting profile: anchor pattern and adhesion
How shot blasting profile controls coating adhesion: the Rz range to specify, how to measure it, and why a 90 µm profile under 60 µm of powder fails early.
Get a quote
Do you take powder coating as job work?
Yes, subject to part size and condition. Powder booth capacity is 18 ft by 14 ft.
Can you match our colour?
Yes, to RAL or a supplied sample, in both powder coat and wet paint.
Do you shot blast before coating?
Where the part and specification call for it. We have a 16 ft by 16 ft blast chamber.
Do you apply primers?
Yes. Primer and intermediate coats are applied in the wet paint booth before the topcoat.
How do you handle effluent?
Through our own effluent treatment plant, operated under ISO 14001:2015 certification.