Ganesh Multitech EngineeringGANESH MULTITECHENGINEERING PVT. LTD.home

Data centre racks

We manufacture rack frames, server and network enclosures, cable management panels, mounting rails and blanking plates to customer drawings.

Request a quotation
Data centre racks manufactured by Ganesh Multitech

Overview

Rack and enclosure parts are cut, formed, welded and coated with dimensional and finish requirements controlled through the same manufacturing route.

Specifications

MaterialCRCA, mild steel, aluminium, stainless steel where specified
Surface treatmentSeven tank pretreatment and powder coating
Manufacturing basisCustomer drawing and specification
Country of originMade in India

Individual parts

FAQs

Do you make racks to a specific standard?

We manufacture to your drawing and specification. Send the rack unit dimensions and hole pattern.

Can you supply assembled and coated racks?

Yes, welded, coated and packed, or as knock-down panel sets for assembly at your end.

What quantities do you take?

Prototype quantities on laser-formed parts and volume runs on tooling are both possible.

Racks and enclosures: the technical detail behind this page

19-inch rack frames, mounting rails, perforated doors, blanking panels, PDU brackets and the electrical enclosures around them.

19 IN · 42U RACK FRAMESTATIC LOADRAIL DETAILRAIL HOLE PATTERN · 44.45 mmEIA-310 · IEC 60297-3-100482.6 mm42UU PITCHRAILMASKED BONDRACK WIDTH482.6 mmHOLE PITCH44.45 mmCOATINGmasked bondsPROCESS ROUTECUTFORMWELDCOATASSEMBLEPROCESSDATA CENTRE RACKS ENCLOSURES

Racks and enclosures · 12 min read

19-inch rack frame design guide: tolerances and DFM

Data centre 19-inch rack frame design: the 482.6 mm and 465.1 mm dimensions that decide fit, bend and weld rules for 2 mm CRCA, coating allowance and checks.

19 IN · 48U RACK FRAMESTATIC LOADRAIL DETAILRAIL HOLE PATTERN · 44.45 mmEIA-310 · IEC 60297-3-100482.6 mm48UU PITCHRAILMASKED BONDRACK WIDTH482.6 mmHOLE PITCH44.45 mmCOATINGmasked bondsPROCESS ROUTECUTFORMWELDCOATASSEMBLEPROCESSDATA CENTRE RACKS ENCLOSURES

Racks and enclosures · 11 min read

Data centre blanking panel: design, materials and manufacturing

A data centre blanking panel closes a 1U hole that leaks about 100 CFM. Steel gauge, finish, latch and flatness compared, with the numbers behind each.

19 IN · 42U RACK FRAMESTATIC LOADRAIL DETAILRAIL HOLE PATTERN · 44.45 mmEIA-310 · IEC 60297-3-100482.6 mm42UU PITCHRAILMASKED BONDRACK WIDTH482.6 mmHOLE PITCH44.45 mmCOATINGmasked bondsPROCESS ROUTECUTFORMWELDCOATASSEMBLEPROCESSDATA CENTRE RACKS ENCLOSURES

Racks and enclosures · 10 min read

Switchgear enclosure heat: design, failure modes and the fix

Switchgear enclosure heat is a surface-area sum: 1,500 W in a 2,000 mm cabinet needs 55 K of rise unless it is ventilated. Here are the limits and the fix.

Get a quote