Robotic welding is repeatable
The same heat, speed and path are applied across a batch.
Welded assemblies
We weld sheet metal assemblies in fixtures and can finish them before dispatch.
Request a quote
Specifications
| Machine | Specification | Quantity | Plant |
|---|---|---|---|
| CLOOS robotic welding cells | Fixture mounted, programmed | 3 | Mumbai (Vasai) and Nagpur |
| Manual welding stations | MIG and MAG, spot and SPM | 30 plus | Mumbai (Vasai) and Nagpur |
| Welding fixtures | Designed and built in-house | Tool room | Mumbai (Vasai) |
Materials and thickness
CRCAMild steelStainless steelAluminium
Parts we make
Why customers choose us
A fixture holds geometry
Fixtures are designed and maintained in the tool room.
One assembly instead of parts
Fewer suppliers and fewer inbound inspection points.
Bending and welding: the technical detail behind this page
Press brake bending, bend allowance, fixtures, robotic MIG welding, distortion control and the tolerances a finished welded assembly can actually hold.
Bending and welding · 10 min read
Hole-to-bend distance in sheet metal design
A hole inside the V-die zone bends and ovalises. The formula, a table by thickness, and four fixes when the hole cannot move away from the bend.
Bending and welding · 10 min read
CNC press brake bending: a buyer's guide
What a press brake specification does and does not promise, the tonnage table that limits your part, and the eight questions that separate two bending quotes.
Bending and welding · 10 min read
Robotic welding for repeat sheet metal assemblies
Robotic welding for repeat sheet metal assemblies: the gap, clearance, tack and fixture repeatability a part needs before a cell can hold its tolerance.
Get a quote
Can you build the welding fixtures?
Yes, in our own tool room, and we maintain them for the life of the part.
Can the assembly be delivered painted?
Yes. Seven tank pretreatment, shot blasting, powder coating and oven curing are in the same plants.
How large an assembly can you handle?
The 40 ft by 16 ft laser bed and 16 ft by 16 ft blast chamber handle full frames, canopies and guards.
Which documentation is available?
We provide a manufacturability review before quoting, first article inspection reports, material traceability to mill certificates, and PPAP documentation where the programme requires it.